• 3 speeds.
• 5" downrod or flush mounted fitting.
• On/off pull cord switch.
• Blade diameter: 1300mm.
• Forward control for summer operation.
• Reverse control for winter operation.
• Finish: Polished brass with reversible wood and cane/walnut effect blades.

The efficient and stylish Premier range of pressure developing fans is designed specifically for domestic applications, including bathrooms, shower rooms toilets and utility rooms where longer duct runs are required. They are also suitable for commercial applications such as hotel rooms, office toilets, commercial bathrooms, and for coastal installations.

All models have a gloss white casing with clean and sleek appearance. A two part casing means Premier fans can easily be recessed or surface mounted. They can be fitted into ceilings or studwork walls in recesses as little as 50mm deep using the side entry knockout provided, an FDA adaptor and Profile 29 flat duct. Alternatively 100mm circular ducting can be used. All feature an automatic air operated back draught shutter and the CF20 range are supplied with a brown 100mm external outlet grille for wall or soffit fixing.

The clip off front cover and removable fan blade on all models allow easy cleaning and maintenance. All also have a neon indicator (except DX180/T).

F53 models are IPX5 rated whereas the F50,F51,F52 models are IPX4. All are BEAB approved. They are all suitable for 220-240Vac 50Hz mains operation. Motors are totally enclosed and maintenance free for life, with self aligning bearings and a thermal cut-out. All electronics and wiring terminals are fully protected.

Hole size: 117mm (wall) 120mm (window)

Operated by remote switch. Extract performance 94m3/h. Sound pressure level 49db. 4 inch

Built in fixed 20 minutes run on period after the light has been switched off. Extract performance 94m3/h. Sound pressure level 49db. 4 inch

On/off humidistat adjustable 50-90% RH. Extract performance 94m3/h. Sound pressure level 49db. 4 inch

Room size selector matches extract performance for improved efficiency

‘Quickvisit’ delay feature prevents fan from running should light be switched on/off again within 2 minutes.

Mechanical trickle ventilation facility

Three speed and trickle settings

Built – in run on period after light is switched off.  User adjustable from 30s to 20mins.

Extract performance 108m3/h. Sound pressure level 50db.

4 inch

Step out of the shower cubicle. Is the mirror steamed up? There is another way. Remove the cause of condensation at source with an Xpelair inline shower fan system.

With a neat grille installed directly over the shower, humid or moist air will be ducted away by a fan above the ceiling and onwards to a grille installed outside, typically in the soffit.  Will I be standing in a draught? No, air will not be pulled into a normal cubicle, only flow over it.

The systems contain all the components necessary for a normal installation, comprising:

• inline fan
• 3m of flexible duct
• Four worm drive clips
• Internal ceiling grille with sleek styling in white
• Outside soffit/wall grille
• capacity 133m3/h

All electronics circuits and wiring terminals are fully protected. Motors are Class B lubricated for life, fitted with safety thermal overload protection and suitable for ambient temperatures up to 40ºC.

Xpelair XIL systems conform to Building Regulations mechanical ventilation for toilets shower rooms and bathrooms.

Built-in overrun timer adjustable at installation from 3-15mins.

Operated by a remote switch (in a bathroom, wired to the lighting circuit)

Can also be wired to a water flow switch, fitted in the pipework to the shower control, to switch on/off when shower is in use.

Hole Diameter: 165mm 

Pre-select speed to suit application

Alternatively use optional COS switch to change between speeds and on/off

Includes external wall grille.

Extract performance 245m3/h. 4 inch fan. Sound pressure 55db

Commercial grade:

Choice of optional controllers.

Suitable for single and sealed double glazing windows and panels up to 25mm.

Balanced external rotor motor and impeller for quiet efficiency.

Sealed for life maintenance free bearings, suitable for running at any angle.

Built-in silent action electro-thermal shutter cassette.

Passive trickle vent facility for background ventilation with fan off.

Easy clean high gloss ABS housing with integral finger safety guard.

Shadow grey external grille for unobtrusive external appearance.

Tamperproof internal connection safety plug and socket.

Unique metal ladder strip/screw connection to external grille for security and weather tight seal.

Extact capacity 728m3h (9 inch).  1614m3h (12 inch).  Sound pressure 55db

For use with F58

On/off control with neon indicator. Infinitely variable speed selection controls extract and intake air flow.  For use with up to four fans (not mixed sizes).

Slide switch provides fan on/off control.

Adjustable speed control for infinitely variable speeds.  Complete with power ‘on’ indicator light.

For Xpelair XIDP plastic inline centrifugal fans

9” (266mm hole diameter) or 12” (330mm hole diameter)

Hole diameter: 117mm

Ducting size: 100mm

 Vents and tube etc.